A local route to Force USA all-in-one trainers and selected REP racks, benches and cable systems. Useful for comparing the included parts of a complete trainer against a rack that needs several configuration choices.
Force USA, REP and complete strength setups
Brands in the cited range: Force USA, REP.
Visit Gym and FitnessGet a quote for your postcode and the exact package. Confirm stock or preorder timing, the delivery service, assembly and the contact for parts or repairs.
Delivery & assembly Consumer guarantees21 profiles linked to this supplier. This is the coverage on our site, not the retailer’s entire catalogue.
BlackWing’s sliding seat closes the pad gap, while twelve back angles include decline. Six seat settings and a choice of pad widths make this a highly adjustable bench weighing about 59.4 kg.
PR-4000 uses 5/8-inch attachment holes with one-inch spacing through the bench zone. Its modular frame comes in different layouts and depths, with compatible storage and cable additions.
The G1 V2 combines a rack with plate-loaded 2:1 cables, a pull-up bar and a landmine. Its 21 cable-height positions add accessory work to the same 145 cm-wide frame used for barbell lifts.
A$1,599Listed 17 Oct 2026
RowErg combines an air flywheel, sliding seat and PM5 workout monitor. This standard-leg model separates into two sections without tools, keeping storage manageable once the rowing area is clear.
A$1,705Listed 17 Oct 2026
The Australian PÉPIN FAST package supplies steel-plate dumbbells and metal cradles with 42.5 kg per hand. Sliding selectors handle the main changes, and matching kits increase the maximum to 52.5 or 62.5 kg.
A$2,597Listed 17 Oct 2026
Ares 2.0 adds adjustable cables, pulldowns and seated rows to a matched six-post REP rack. Two rear-mounted 260 lb stacks provide nominal output of 130 lb per adjustable handle at 2:1.
A Smith machine, rack and plate-loaded cable station share the G3 V2 frame. J-hooks, front safeties, a landmine and cable handles are included, while the cables offer 21 height positions.
A$2,699Listed 17 Oct 2026
The G12 pairs a counterbalanced Smith with two selectorised cable stacks and a rack. Its 1:1 pulleys provide the selected stack load at each handle; an included footplate adds Smith leg presses.
A$4,999Listed 17 Oct 2026
G15’s cable connections switch between 2:1 and 4:1, giving nominal maxima of 65 kg or 32.5 kg from each 130 kg stack. A counterbalanced Smith and rack complete the main strength stations.
A$5,299Listed 17 Oct 2026
G20 Pro combines a rack and Smith machine with two 130 kg stacks at 2:1. Its included equipment extends to monolifts, a leg-press plate and a swing arm for a bag or rope trainer.
A$6,999Listed 17 Oct 2026
C10 V2 provides six cable connections through adjustable arms and separate upper and lower centre outlets. A single-track Smith shares the frame, while the lower cables can combine both stacks for heavier work.
A$6,999Listed 17 Oct 2026
Sport 24 puts eight loads from 3 to 24 lb into each compact dumbbell. A magnetic pin selects the weight, with an open rubber-grip handle and a maximum of about 10.9 kg per hand.
Pro 50 combines urethane-coated steel plates with an open handle and a 50 lb maximum per hand. A selector pin handles the main changes; removable handle weights provide the smaller steps.
A$699Listed 17 Oct 2026
Elite EXP Stage 1 supplies a 5–50 lb pair, with unused plates left nested beneath the selected load. Matching expansion stages let the pair grow beyond its starting 22.7 kg per-hand ceiling.
A$622Listed 17 Oct 2026
Nighthawk offers seven back angles from flat to 85°, four seat positions and upright storage. At 40 kg, its shorter frame takes less moving than REP’s heavier AB-5200 or BlackWing.
A$699Listed 17 Oct 2026
AB-5200 2.0 has a 105.9 cm back pad, ten back settings and four seat angles. Wheels and upright storage help manage its 52.16 kg frame, which carries a published 1,000 lb capacity.
A$1,049Listed 17 Oct 2026
PR-5000 is REP’s modular rack with one-inch attachment holes and numbered two-inch spacing. Height, depth and storage choices let the frame accommodate matching Ares or Athena cable configurations.
Arcadia supplies two adjustable 2:1 cable sides in a shallow frame with a pull-up bar. Its 32 trolley positions support varied accessory work, with standard output of 38.6 kg per handle.
BikeErg uses an air flywheel, fixed handlebars and a clutch that lets the fan turn when the pedals stop. The PM5 records sessions, with free ErgData available for workout logging.
A$2,145Listed 17 Oct 2026
A chain-driven fan bike with moving handlebars, an adjustable saddle and an LCD workout monitor. Resistance rises as you drive the fan faster.
A$1,094Listed 17 Oct 2026
A configurable rack frame supplied with a straight pull-up bar. J-hooks, safeties and cable attachments are separate selections.
A$724Listed 17 Oct 2026
Checked 17 Oct 2026. Inclusion identifies a buying option; it is not a rating of customer service.